Products
Biodegradability film: ZERO PLA
<Features>
Biodegradable film that leaves no microplastics behind
- A biodegradable film with physical strength equivalent to general polyethylene.
- Completely decomposes into water, carbon dioxide, and biomass.
- Biodegradation begins after 18-24 months of use.
- Accelerates decomposition in four natural environments: ①Sun (ultraviolet rays) ②Water ③Heat (temperature) ④ Microorganisms (bacteria)
Antibacteria film
- It suppresses the growth of bacteria. (Highly safe inorganic antibacterial agent)
- It has antibacterial action on both the front and back sides.
- Dioxin is not emitted even if it burns.
- Lighter weight, lower cost, and workability than vinyl chloride.
- Please feel free to contact us for anything such as shatterproof, mask case, gown, etc.
Standard sheet
*Custom sizes are also available.
| Thickness (ｍｍ) | Width (ｍｍ) | Length (ｍ) | Paper tube size | Quantity |
| 0.05 | 1000 | 30 | 2 inches | One |
Natural Bio film
- Japan Bioplastic Association certified product.
- It is possible to print the mark certified by the Japan Bioplastics Association on bags and sheets.
- By printing the certification mark, you can appeal to customers that you are working on environmental issues.
- Please contact us for anything such as quantity, color, chuck, special processing, etc.
STAT‐3S Bio (Eco-friendly Anti-Static film)
Japan Bioplastics Association certified product
Eco-friendly antistatic film that incorporates plant-based plastics into the persistent antistatic STAT-3S and reduces CO2 emissions.
It is possible to print the mark certified by the Japan Bioplastics Association on bags and sheets.
STAT-Excellent Film (High performance antistatic film)
1. STAT-Excellent Film (STAT-EF)
(High performance antistatic film)
High spec film with surface resistance of 108Ω
(Measurement environment: 23 ° C × 50% RH)
1. There is no concern about the migration of the antistatic agent , because this film is used by a polymer type non-charged resin.
2. There is not humidity dependence, and Static Decay time is extremely short, and stable surface resistance is maintained.
2. STAT-Excellent Film Weatherability (STAT-EFW)
(High-performance anti-static with weathering film)
High spec film with surface resistance of 108Ω
(Measurement environment: 23 ° C × 50% RH)
1. There is no concern about the migration of the antistatic agent , because this film is used by a polymer type non-charged resin.
2. There is not humidity dependence, and Static Decay time is extremely short, and stable surface resistance is maintained.
3. This film is weather resistance.
Flexible container bag inner package: STAT-FCB
International standard pass certificate
EU regulation No10/2011 Dry use declaration
Best for grocery and FIBC grocery additives inner bag.
Packaging material that has been specialized for powder.
Ideal for pharmaceutical intermediates raw materials.
<Features>
1. Because of using a polymer type antistatic resin, it does not change in quality by a switchover any of additive material to your product in this bag.
2. There is not humidity dependence, and Static Decay time is extremely short.
3. Static decay time from 5000V to 50V is less than one second.
4. International standard IEC61340-4-4 L2 passed (SWISSI Process Safety GmbH) 2010 JIS C 61340-4-4 Compliant.
5. Products by only FDA compatible raw materials.
We got FIBC inner bag standards for various food products.
| Test items (Unit) |
Conditions Degree RH |
Measured value |
|---|---|---|
| Surface Resistivity (O/Sq) |
23±2 Degree 20±5% |
5.96±0.69×1011 |
| 23±2 Degree 60±10% |
7.94±1.35×1010 | |
| Static Decay Rate + / - (sec) |
23±2 Degree 20±5% 5,000V 1%Attenuation |
Outside 0.1 > / 0.1 > |
| Inside 0.1 > / 0.1 > |
||
| Tensile test MD/TD (MPa) |
500mm/min | 0.08 t 48.0/35.9 |
| 0.1t 43.5/39.1 | ||
| Tear test MD/TD (N/mm) |
500mm/min Graves Tear |
0.08t 145/151 0.10t 148/152 |
| Moisture permeability exterior to inner (g/m2d) |
40Sq×90%RH Cup method |
0.08t 7.08 0.10t 5.56 |
* These are typical measurement values, so these are not standard values.
Product size
Thickness:0.05mm - 0.08mm
Width:1500mm - 2100mm
We have stocked as standard size of 0.08mm×1900mm. It is available for cutting your size.
Please contact us if you would like to have other sizes and special shapes bag.
EU regulation No10 / 2011 Dry use Declaration.
Ministry of Health, Labour and Welfare Notification No. 201 pass.
STAT-FDM: FDA Anti Static film
NON AMINE ANTI-STAIC(NON-SURFACTANT),POLYMER ANTI-STATIC BAG
<Features>
Approved in notice of Ministry of Health and Welfare no.370
Example: A bag inside plastic, drum and carton boxes.
1. prevent an electrostatic obstacle and a powder explosion by materials.
(FDA§177,1330，§177,1520(a)(3)(i)(a)(1)§178,2010)
2. Based on MIL-PRF-81705D, an ASTM-D257 standard as the prevention of electric obstacle.
3. For 25kg bag: A characteristic of a tough material and a heat seal bag of stable consistency strength.
4.The anti-static character keeps high performance even if it is low temperature, high temperature and high humidity.
5. The anti-static character keeps high performance even though the film get wet, wipe and rub.
Size:
Thickness: 0.05mm - 0.1mm
Width: 150mm - 1000mm
| SIZE | Qnty/1case | ||
|---|---|---|---|
| Thickness | Width | Length | |
| 0.1mm | 960mm | 1690mm | 50 |
Round bottom anti-static bag for 200L drum
Build-to-order manufacturing
Please feel free to contact us.
Example:Inner bag for 200L drum
1. FDA conformity material's anti-static film which is passed on Ministry of Health and Welfare notification 370th.
2. Surface Resistivity is less than 1011Ω, and static decay late is less than 2 seconds (23 degree ×12±3%RH 5000V to 50v)
3. It is used by anti-static materials of high-molecular form, so that transitivity is very low.
4. Inner package in consideration of strength and anti-static measures.
5. Intermediates for pharmaceutical, food powder and liquids for inner package of drum.
The photograph is part of the roof and body of STAT-FDM C22
Transparent, moisture vapor barrier and anti-static bagss:STAT-MBP
<Features>
STAT-MBP is the long-acting non-chargeable olefin, and two 3-layer moisture-proof bag. Polyethylene film with nylon makes excellent moisture-proof & transparent film which is not like a aluminum foil, high-performance product.
| Test Items | Unit | Other | STAT-MBP | General nylon&polyethylene (Company A) |
Method |
|---|---|---|---|---|---|
| Tensile yield point stress | MPa | MD | 38.7 | 22.8 | JIS K 7127 |
| TD | 33.1 | 22.1 | |||
| Tensile rupture stress | MPa | MD | 34.7 | 42.4 | |
| TD | 34.6 | 43.4 | |||
| Elongation | % | MD | 158 | 409 | |
| TD | 233 | 423 | |||
| Moisture vapor transmission |
g/m10.d | Outside | 3 | 9.1 | JIS Z 0208 |
| Surface Resistivity | Ω/□ | 1010 | 25 Celsius 50% RH |
||
| Static Decay Rate | 5000V to 50V | less than 2 seconds | 25 Celsius 50% RH |
||
| Remarks | Anti-static | General nylon & polyethylene |
Size: Thickness 0.1mm ~ Width 150mm ~ 650mm
STAT-3SN:Transparent Anti-Static Name Holder
*All products are subject to prior sale.
Additive-Free Anti-Static PE + PP
This holder does not "Breed Out" because of using Additive-Free Antistatic film(STAT-3S).
<Features>
Polypropylene (PP) & Anti-Static film (STAT-3S) Two kinds of three levels sheet.
Surface resistance: Outside is less than 1011Ω / Inside is less than 1011Ω
<Layer>
STAT-3S PP300µ
| With a clip and a safety pin |
50pcs |
|---|---|
| 100pcs | |
| 500pcs | |
| 1,000pcs |
STAT-3SF:Transparent Anti-Static file holder
Additive-Free Anti-Static PE + PP
This holder does not "Breed Out" because of using Additive-Free Antistatic film(STAT-3S).
<Features>
Polypropylene (PP) & Anti-Static film (STAT-3S) Two kinds of three levels sheet.
Surface resistance: Outside is less than 1011Ω / Inside is less than 1011Ω
Excellent transparency.
<Layer>
STAT-3S PP300µ
| Size | Qnty |
|---|---|
| (A4) 220mm X 310mm *100pcs=about 5kg |
1,000 |
| 500 | |
| 100 | |
| 10 |
| Size | Qnty |
|---|---|
| (A3) 310mm X 435mm *100pcs=about 10kg |
1,000 |
| 500 | |
| 100 | |
| 10 |
Additive-Free Anti-Static film: STAT-3S
Anti-Static Polyethylene film (Slip-type & Non-slip-type)
<Features>
STAT-3S polymer itself satisfied with an anti-static "Safety", "Stability" and "Satisfactory" for non-charging with electricity characteristics.
STAT-3S does not change in quality by a switchover any of additive material to your product in this bag.
There is not humidity dependence, and Static Decay time is extremely short.
There is an effect in stable resistance value semipermanently less than 1010 internal Ω and less than 1011 surface resistance value outside Ω.
Processing: gusset bag, square bottom bags, zipper bags, and other special processing.
Color:Blue,Green,Pink,Natural(Available for special orders)
STAT-3S "Blue,Slip-Type "(Standard bag)
| No. | Size(mm) | Qnty/1case | Weight/1case (about) |
||
|---|---|---|---|---|---|
| Thickness | Width | Length | |||
| 3S-0715 | 0.05 | 70 | 150 | 2,000 | 3kg |
| 3S-1015 | 0.05 | 100 | 150 | 2,000 | 4kg |
| 3S-1020 | 0.05 | 100 | 200 | 2,000 | 5kg |
| 3S-1525 | 0.05 | 150 | 250 | 2,000 | 8kg |
| 3S-2030 | 0.05 | 200 | 300 | 1,000 | 7kg |
| 3S-2535 | 0.05 | 250 | 350 | 1,000 | 9kg |
| 3S-3040 | 0.05 | 300 | 400 | 500 | 7kg |
| 3S-3545 | 0.05 | 350 | 450 | 500 | 9kg |
| 3S-4050 | 0.05 | 400 | 500 | 500 | 11kg |
*Other sizes are production by order.
Anti-Static film (An antistatic agent type): STAT-A
<Features>
Versatility & low-priced Anti-Static bag.
Surface resistance value: less than 1011Ω
Thickness: 40µ - 150µ Width: 50mm - 1200mm
(Special order from 1000m is available.)
Z bag and corner bottom bag are also available)
Color:Blue,Green,Pink,Natural,Yellow(Available for special orders)
STAT-A "Blue" (Standard sheets)
| Thickness | Width | Length | Qnty/1case |
|---|---|---|---|
| 0.05mm | 1200mm | 200M | 2pcs |
*Other sizes are production by order.
Conductive film: STAT-B
(Static electricity dispersed film: Hi carbon black contents)
<Features>
Various strength and hi-quality surface resistance film.(Conductive film)
Surface resistance value is less than 104Ω.
Thickness: 40µ - 150µ Width: 50mm -
ST-620 Barrier ESD shielding film
Aluminium layer makes Faraday Cage and lower transmitting voltage.
<Features>
1. A stable resistance level continues by using STAT-3S (Anti-Static film) in the most inner layer.
2. Reliable moisture proof bag which is able to check the contents.
3. Metal shield bags are mainly designed for transportation of electronic parts such as semiconductors and assemblies.
<Layer>
Antistatic coat film VM-PET12μ/DL/STAT-3S 50μ Total:62μ
ST-620 (Standard bags)
| Size (with 10mm 2side sealing) |
Qnty |
|---|---|
| 102mm×152mm (122mm×152mm) |
100pcs |
| 203mm×305mm (223mm×305mm) |
100pcs |
| 279mm×381mm (299mm×381mm) |
100pcs |
| 381mm×457mm (401mm×457mm) |
100pcs |
ESD Shielding and moisture vapor barrier bags: ST-678
For moisture vapor, gas barrier film of anti-static
<Features>
Hi-quality moisture and gas barrier film
Using reliable STAT-3S for the most inner layer
Tough and strength film
<Layer>
Anti-static coating NY(Nylon15µ/PE15µ/AL7µ/PE15µ/STAT-3S50µ (Total: 102µ)
Transparent, moisture vapor barrier and anti-static bagss: Cera-PET
Transparent, Moisture vapor, Anti-Static film
<Features>
Environmental measures packing materials
It is a dampproofing gas barrier film by ceramic vacuum evaporation without using aluminum foil and a vinylidene chloride.
Stable resistance value is effective in using tree STAT-3S for the most inner layer semipermanently.
<Layer>
S-type
Anti-static coating, ceramic vacuum evaporation PET 12µ /S-LDPE 25µ /STAT-3S 50µ
B-type
Anti-static coating, ceramic vacuum evaporation PET 12µ /ONY 15µ/S-LDPE 20µ/STAT-3S 50µ
Biodegradability bag ：Green Star
<Features>
It is an authorized by "Biodegradable Prastics Society" of renewable resource film biodegradability plastic of materials born from a plant.
A combustion calorie is less than the normal PE film, and it is as environmental measures.
It is possible to make as anti-static film, so it is available for industry market.
Zerust ESD Shield
<Features>
Anti-static and prevention of rust film that is joint development of "Taiyo Petroleum Gas Co., Ltd" and "Techno Stat Co., Ltd".(No. 3356376 patent)
Zerust ESD Shield (Standard bag)
| No. | Size (mm) | Qnty/1case | ||
|---|---|---|---|---|
| Thickness | Width | Length | ||
| HZ-4 | 0.07 | 100 | 200 | 3,000 |
| HZ-6 | 0.07 | 150 | 250 | 2,000 |
| HZ-8 | 0.07 | 200 | 350 | 2,000 |
| HZ-14 | 0.07 | 350 | 500 | 1,000 |
| HZ-18 | 0.07 | 450 | 600 | 500 |
